UTR6012-Utranscom

UTR6012

Buy At

UTR6012 RTU with 4 DI, 4 DO, RS232 (RS485 optional) standard electrical interface can connect various industrial equipment, such as PLC, meters, sensors, electrical switches. It monitors the industrial system real-time running status and data, as well as constructs the remote device to a proprietary central computer and mobile phones through the GSM/GPRS/3G/4G/Wi-Fi communication network. It efficiently acquires the remote equipment operating parameters and process management, can be widely used in industrial automatic control, base station / computer room monitoring, environmental monitoring, water conservancy project, power industries, agriculture, etc.

Features:

Adopted highly integrated industrial 32-bit ARM MCU
Reliable performance with built-in double watchdog, 24×7 operation
With signal filtering mechanisms
Network-reconnect and retransmission to ensure data accurately transmit
Update RTC automatically or manually, clock source support Sms, NTP, CwtIO Server
Can set multiple timers(second, minute, day, week, month) to execute actions, e.g. output, upload data, change setting
Event-based linkage programming, e.g. alarm linkage output
Provide configure software, visual programming, over 100 parameters can be set
Inside temperature optional, can set high or low to alarm
Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost

Port Features:

Port	Qty	Features
DI (digital input)	4	lAccept dry contact
DO (digital output)	4	lTransistor output (drive voltage=power supply voltage, Drive current≤500mA lRemote or local event activate DO on/off/pulse lRemember status when power lost
RS232	1	lSupport Modbus RTU protocol lWorking as a modbus master to read/write 32 data from slaves lConfiguration port lRS485 optional

Communication features

Wireless network communication

lOption network: GPRS, 3G, 4G, Wi-Fi

lTCP/IP connect at most 4 servers(support Static IP address or domain)

lEvents(e.g. alarm, timer) trigger upload data

lCommunication protocol: Modbus TCP，http post, Cwt_IO(two-way communication)

lSupport two-way data transparent transmission with RS485 or RS232

SMS

Communication

(only available for

cellular version)

lPreset 10 phone numbers (support distribute authority to receive sms)

lSms alarm when any IO channel triggered or out of preset normal range

lEditable alarm and recover sms with time stamp

lQuery any IO channel’s status or value via sms command

lControl output via sms command

lSms report any IO channel’s status or value on schedule

lRemote setting via sms commands

lCan query SIM card balance, sms forward

l support power lost sms alarm and recover sms(works with inside battery)

RS232/RS485

Modbus

communication

lSupport Modbus RTU protocol

lWorking as a modbus master to read/write 32 data from slaves(like meter, PLC, transducer etc.)

lSupport Modbus RTU to TCP convert over GPRS/3G

Specifications

Core	MCU	Cortex M3 32-bit ARM
Power	Power supply	9-28V DC (Standard adapter: DC 12V/1.5A)
Power	Consumption	12V input Max. 150mA/Average 50mA
Network	Wireless Network	Either GPRS(or 3G/4G, need simcard) or Wi-Fi(Not need simcard) Default: GSM/GPRS (4 band 850/900/1800/1900Mhz) Option: WCDMA (3G), FDD LTE(4G) Option: Wi-Fi, 802.11 b/g security WEP/WPA/WPA2
IO channel	Digital input(DI)	4 channels, accept dry contact
IO channel	Digital output(DO)	4 channels, transistor output Output drive voltage=power supply DC voltage Drive current ≤500mA
Series port	RS232 Option: RS485	1 port, baud rate: 1200~115200dps, default 9600,n,8,1
Other interface	SIM/UIM	Standard user card interface
Other interface	Antenna	Standard SMA female interface (50Ω)
Others	Battery	Optional lithium-polymer, 500mAh/3.7V，life:8-20 hours
Working Environment	temperature	-30℃～+70℃
Working Environment	humidity	5～95%(non-condensing)
Physical	Terminals	1×14pin 3.81mm spacing, pluggable
	Housing	Providing IP30 protection
	Dimension	95×63×25mm
	Weight	256g

Size diagram

Terminals figure